How To Lube A 1911

If you own a 1911, you know that this classic handgun requires a little more care and maintenance than most other firearms. One of the most important things you can do to keep your 1911 in good working order is to regularly lube the gun.

Fortunately, lubing a 1911 is not difficult. In this post, we’ll walk you through the simple process of lubing your 1911 so that it will continue to function properly for years to come.

Advance Tips: How To Lube A 1911

If you’re the proud owner of a 1911, you know that this classic handgun requires a little more TLC than your average firearm. That’s because the 1911 is a semi-automatic pistol with a unique browning-type locking system, which means there are a lot of small parts that need to be properly lubricated in order for the gun to function properly.

Luckily, lubing a 1911 isn’t difficult, and in this article we’ll show you how to do it in just a few easy steps.

Before you begin, make sure you have the following items:

-A good quality gun oil
-A clean, lint-free rag
-A small brush or toothpick (optional)

Step 1: Start by removing the magazine and emptying the chamber. Then, take a look at the locking system and identify the four main parts that need to be lubricated: the barrel bushing, the recoil spring plug, the slide stop lever, and the thumb safety.

Step 2: Apply a few drops of gun oil to the rag and wipe down all four of these parts. If you’re using a brush or toothpick, you can get into the nooks and crannies of the parts more easily.

Step 3: Once the parts are all coated with a thin layer of oil, reassemble the gun and cycle the action a few times to work the oil into the moving parts.

Step 4: Finally, use the rag to wipe away any excess oil from the outside of the gun.

And that’s it! By following these simple steps, you can ensure that your 1911 will function properly and reliably for many years to come.

Frequently Asked Question

1. How do I properly lube a 1911?

To properly lube a 1911, you will need to first disassemble the gun. Once the gun is disassembled, you will need to apply a light coat of oil to all metal surfaces. Make sure to pay special attention to the barrel, slide, and frame rails. Once you have applied the oil, you will need to reassemble the gun.

2. What type of oil should I use on my 1911?

There are a variety of oils that can be used on a 1911. However, we recommend using a light weight oil such as WD-40 or 3-in-1 oil.

3. How often should I lube my 1911?

It is generally recommended to lube your 1911 after every range session. However, if you are storing your gun for an extended period of time, you may want to lube it once every few months.

4. Can I use a synthetic oil on my 1911?

Yes, you can use a synthetic oil on your 1911. However, we recommend sticking to a light weight oil such as WD-40 or 3-in-1 oil.

5. What parts of the gun do I need to lube?

When lubing a 1911, you will need to apply a light coat of oil to all metal surfaces. Make sure to pay special attention to the barrel, slide, and frame rails.

Conclusion

If you’re a fan of the 1911, then you know that one of the most important things you can do to keep your gun running smoothly is to keep it properly lubricated. But what is the best way to lubricate a 1911?

There are a few schools of thought on this, but the most important thing is to use a good quality lubricant and to make sure that you apply it to all the moving parts of the gun. A good place to start is by applying a light coat of lubricant to the inside of the slide and to the barrel. Then, you can apply a more generous amount of lubricant to the outside of the slide, as well as to the frame rails.

Once you’ve applied the lubricant, you’ll want to work the action of the gun a few times to spread it around. Once you’re done, you should have a smooth-running 1911 that will last for many years to come!

Similar Posts